[PCI DSS 3.0] [PCI DSS 3.0] 11.1 Implement processes to test for the presence of wireless access points (802.11), and detect and

pcinetwork

PCINetwork.org Admin
#1
11.1 Implement processes to test for the presence of wireless access points (802.11), and detect and identify all authorized and unauthorized wireless access points on a quarterly basis.

Note: Methods that may be used in the process include but are not limited to wireless network scans, physical/logical inspections of system components and infrastructure, network access control (NAC), or wireless IDS/IPS.
Whichever methods are used, they must be sufficient to detect and identify both authorized and unauthorized devices.


11.1.a Examine policies and procedures to verify processes are defined for detection and identification of both authorized and unauthorized wireless access points on a quarterly basis.

11.1.b Verify that the methodology is adequate to detect and identify any unauthorized wireless access points, including at least the following:
• WLAN cards inserted into system components
• Portable or mobile devices attached to system components to create a wireless access point (for example, by USB, etc.)
• Wireless devices attached to a network port or network device.

11.1.c Examine output from recent wireless scans to verify that:
• Authorized and unauthorized wireless access points are identified, and
• The scan is performed at least quarterly for all system components and facilities.

11.1.d If automated monitoring is utilized (for example, wireless IDS/IPS, NAC, etc.), verify the configuration will generate alerts to notify personnel.

Implementation and/or exploitation of wireless technology within a network are some of the most common paths for malicious users to gain access to the network and cardholder data. If a wireless device or network is installed without a company’s knowledge, it can allow an attacker to easily and “invisibly” enter the network. Unauthorized wireless devices may be hidden within or attached to a computer or other system component, or be attached directly to a network port or network device, such as a switch or router. Any such unauthorized device could result in an unauthorized access point into the environment.

Knowing which wireless devices are authorized can help administrators quickly identify non- authorized wireless devices, and responding to the identification of unauthorized wireless access points helps to proactively minimize the exposure of CDE to malicious individuals.

Due to the ease with which a wireless access point can be attached to a network, the difficulty in detecting their presence, and the increased risk presented by unauthorized wireless devices, these processes must be performed even when a policy exists prohibiting the use of wireless technology.
The size and complexity of a particular environment will dictate the appropriate tools and processes to be used to provide sufficient assurance that a rogue wireless access point has not been installed in the environment.

For example: In the case of a single standalone retail kiosk in a shopping mall, where all communication components are contained within tamper-resistant and tamper-evident casings, performing a detailed physical inspection of the kiosk itself may be sufficient to provide assurance that a rogue wireless access point has not been attached or installed. However, in an environment with multiple nodes (such as in a large retail store, call center, server room or data center), detailed physical inspection is difficult. In this case, multiple methods may be combined to meet the requirement, such as performing physical system inspections in conjunction with the results of a wireless analyzer.
 
Top